Sunday, February 14, 2010

Garry Ultralight Upright Episode 17

- Garry www.garryvac.com The ultra-vacuum ™ light engine has a low power consumption 3.5 amp and a great way to design aircraft, can work more efficiently than Dyson ® and many other upright vacuum . The Garry ™ design uses a direct air flow, the air can be a shorter distance to travel with fewer restrictions. The air route is much shorter than traditional upright vacuum cleaner with only 1 strong curve.

Thanks To : Buy Speakers Way to find about Goose Down Comforter,Down Comforter where to find the best Plumbing Sink

Posted by at No comments:
Labels: , ,

Check Out Rabbit Air MinusA2 wall-mount kit for (model SPA-700A and SPA-780A)

Rabbit Air MinusA2 wall-mount kit for (model SPA-700A and SPA-780A) Review



I've had this thing running for a couple of days now, and it does work very well. I checked it using a green laser pointer, which brightly illuminates tiny particles in the air along the length of the beam. When moved across the output vent of the MinusA2 the beam becomes almost invisible, so I have no doubts it's doing it's job.

It is very quiet on the low settings, though I wouldn't go so far as to call it silent, there is a quiet steady tone emitted but it's not too bothersome unless you're close to it. I would certainly prefer if it were only the white noise of the air movement that was audible, though.

----

Edit:
As part of my review I had previously mentioned the fact that this purifier was taking a disliking to my humidifier. I've done some further research and testing and found that it was the fault of my humidifier. It turns out that ultrasonic humidifiers inject a really nasty volume of particulate matter into the air while they run and so the MinusA2 was constantly having to filter it. This, again, was easily verifiable with my green laser pointer. I've switched to warm mist humidifiers (that simply boil/evaporate the water) and no more issues, the two live happily side-by-side.

So: DO NOT use an ultrasonic humidifier in conjunction with this purifier. In fact, based on the volume of particles they throw into the air, I'd seriously recommend against ultrasonic humidifiers in general.

I've had the MinusA2 running steady for weeks now and it's still doing it's job extremely well.



Rabbit Air MinusA2 wall-mount kit for (model SPA-700A and SPA-780A) Feature


  • This wall mount bracket is designed to fit the Rabbit Air MinusA2 air purifier.
  • What's Included: (1) Wall Mount bracket and (2) Instructions.
  • For liability reasons screws are not included. Consult your local hardware store or contractor for installation guidelines.
  • Get Free Shipping with MinusA2 Air Purifier purchase. To see the MinusA2 select "Other Products by Rabbit Air" next to the main picture.



Rabbit Air MinusA2 wall-mount kit for (model SPA-700A and SPA-780A) Overview


The BioGS is Rabbit Air's signature air purifier. Ranked highest in areas of quality and efficiency, Rabbit Air is a new generation air purifier that eliminates all the weaknesses of conventional HEPA air purifiers. A state-of-the-art HEPA air purifier, this model flaunts all of Rabbit Air's finest qualities while offering higher efficiency and an even more attractive design. With washable filters made from bioengineered fiber material, the BioGS traps and destroys allergens down to 0.3 microns in size, 99.97% of the time.


Available at Amazon Check Price Now!


Related Products



Customer Reviews


Should not have to pay extra. - David - Southern California
The product does what it is supposed to do, but I'm giving the company one star for not including this cheap strip of metal with all of their purifiers. It is beyond ridiculous to charge people an additional to hang their expensive filters on a damn wall.



.95? - Lee M. Jensen - Richmond, CA
I like the purifier. But, why isn't this thin piece of flimsy metal included with the 0 product for which it is intended?



Kinda flimsy... could be more versatile... - H. Chen - Seattle, WA USA
This is just a cheap piece of metal plate, pretty thin and feels flimsy. It's also not very wide, I wasn't able to find 2 studs that were close enough to properly mount this and when I screwed it onto a single stud with the center 2 holes, the sides bend away from the wall a bit when the Rabbit Air is hung. I had to improvise and screw the plate onto a 5-ply piece of wood and then mounted the wood+plate onto a single stud. Seems secure now...



This is a bracket. - N. Cody - San Francisco, CA USA
Amazon keeps listing it as something I should review so here it is:
This is a bracket. It holds the purifier to the wall. It is a little lame they charge for a simple bent piece of metal. It does what it should as the purifier has yet to fall off the wall.


*** Product Information and Prices Stored: Feb 14, 2010 14:00:05

Related : Buy Speakers Buy Speakers Rotary Mower find save rotary mower, rotary lawn mower, and much more save.

Posted by at No comments:
Labels: , , , , ,

A guide for the DIY Vacuum Cleaner Repair

It appears that your vacuum will always malfunction immediately before reaching the company. What to do if the vacuum is not working properly? Many people simply throw away a vacuum, and when you buy a new one. But did you know that it is easy to repair a vacuum cleaner?

You can use a large amount of information can be found at the following website of the manufacturer, which produced a vacuum. For example, if you have a Hoover vacuum, you can learn in particular pieces of Hooverand how they work.

To resolve this problem, you first need to determine what is wrong with your vacuum cleaner.

There's really a lot of spare vacuum malfunction. The most common problem is a malfunctioning belt. To check the belt vacuum cleaner, you want to turn the vacuum on the front so that the brush you are facing. You will notice a small plate around the brush. Solve this problem. Check the tape. It 'may have broken or still reelingpart of the brush. If you failed, you should take the belt with you in a store to buy a new device. Many stores carry shares vacuum cleaners, including stores like Wal-Mart and Target. See the correct size belt, and many times a package of different size belt makes it easier to make sure you find the right contain a. Vacuum cleaner belts are not expensive at all.

They also want to check the vacuum agitator brush. Sometimes itwith disheveled hair, pieces of carpet or a string. You should use a pair of scissors to cut out all this. If clean, you can simply through the strap and tighten the back plate on the front.

If your vacuum is removed with the poor, you might have something blocking one of the tubes. Remove the tubes, one at a time, consult your owner's manual, when necessary. If you have problems, you can reach the block at the end of a broom or broom handle to use to enforce the disability.

Besidesuseful for some routine maintenance work is not on yet. You want to check the vacuum filter frequently to ensure that it gets dirty or blocked. Filter vacuum can performanace on your machine. Check also the cable from the vacuum to ensure that it is not damaged. Empty cable can often be damaged if they are overwhelmed by the emptiness.

Most of the problems you have with your vacuum or brush will be placed on the stirrer connected to a belt or a block.Save time and money when you do the repairs themselves. You will be surprised how easy it is.

Sometimes a vacuum, and electrical problems that are much more difficult to resolve on their own. In this case, it is probably better than him by someone who knows how to fix a gap or make the transition to a new machine.

The next time you struggle to empty, try these simple tricks. They could only breathe new life back into the void!

Thanks To : Buy Speakers Buy Speakers where to find the best Plumbing Sink

Posted by at No comments:
Labels: , ,
Subscribe to: Posts (Atom)